TIL the old guy at the lumber yard in Grand Rapids was dead wrong about letting plywood sit flat before cutting
I build face frame cabinets out of my garage in Grand Rapids and I'm still mad about this one. Back in April I picked up six sheets of 3/4 birch ply and the old timer at the counter said let it lay flat on the floor a few days so it settles, so I did. Cut my carcass parts two weeks later and every single panel was cupped enough that my dadoes wander and the box won't square up. He meant well but what he left out is you need to store it on stickers with air moving or it takes on whatever the concrete floor gives it. Six sheets at $78 a pop and half of it turned into shop scrap. Now I check flat with a straightedge before it leaves the rack and I don't care who side-eyes me. Any of you had luck flipping sheets and re-stacking, or is that batch just headed for the burn pile?