Took me 3 days to chase a fuel leak that turned out to be a $4 O-ring on a Cessna 172
I spent the better part of three days last week chasing a slow fuel leak on a 172 that came in for annual. It was weeping just enough to leave a faint blue stain on the belly, but not enough to show up on a static run. I pressure tested the lines, pulled panels, checked every B-nut on the firewall, and even swapped the strainer gasket twice thinking I had a bad seat. Turned out the culprit was a tiny O-ring on the selector valve that had gone flat, and I only found it after I finally got smart and put a paper towel under the valve overnight. Next morning, one wet spot and a 20 minute fix. Three days of head scratching for a part that costs less than a sandwich, but I'll take the win. Anyone got a better trick for finding those slow weeps without tearing half the airplane apart?